This utility can be used to open multiple ports to a single device or devices on your home network.

1. Access the web interface for your fibre router.
2. Click the Advanced tab.
3. Click Security on the left-hand side of the screen.
4. Click Port Forwarding on the left-hand side of the screen.
5. Click the New button.
6. Either:
   • Select the device you are forwarding from the Device dropdown list, or
   • Enter the IP Address of the device you would like to port forward to.
7. Select the Protocol from the drop-down list.
8. Enter the Port Start for the service you would like to open.
9. Enter the Port End for the service you would like to open. If you only need to open a single port number.
10. Either:
    • Select All IP Addresses to allow remote access from all address, or
    • Enter the WAN IP Address for the service you are connecting to.
11. Enter the Port Start for the service you would like to open.
12. Enter the Port End for the service you would like to open. If you only need to open a single port number.
13. Click the Apply button.